Books and textbooks for students published in Romanian publishers
1. Tașcău, M. Dreucean, Robotics Elements, "Politehnica" Publisher, Timişoara, 2008
2. M. Toth-Taşcău, D. Drăgulescu, Robot motion planning and generation, Planificarea şi generarea mişcării roboţilor, "Orizonturi Universitare" Publisher, Timişoara, 2002
3. D. Drăgulescu, M. Toth-Taşcău, Mecanica, "Orizonturi Universitare" Publisher, Timişoara, 2002
4. D. Drăgulescu, D. Iosif, M. Toth-Taşcău, Robot motion planning by artificial vision, Technical Publisher, Bucharest, 2002
5. M. Toth-Taşcău, Kinematics and Dynamics of intelligent robots, "Politehnica" Publisher, Timisoara, 2001
Papers published in ISI journals
1. C. Precup, M. Ifrim, M. Toth-Taşcǎu, L. Rusu, Experimental forensic biometric study on the femur bone resistance as compared to the upper limb long bones resistance, Romanian Journal of Legal Medicine, (3), 2009, p.221-226
2. D.I. Stoia, N. Faur, M. Toth-Tașcău, L. Culea, In Vitro Experimental Testing of a Cervical Implanted Unit, Advances in Strength of Materials, Trans Tech Publications Ltd Switzerland, Key Engineering Materials, Vol. 399, ISSN 1013-9826, 2009, p.205-210
3. M. Dreucean, G. Tanasie, M. Toth-Taşcǎu, H. Boss, B. Hoinoiu, D. Poenaru, Articular Rehabilitation Controlled by Image Processing-Study on Animals, Tissue Engineering, Part A, Vol. 14, number 5: 691-943. doi:10.1089/tea.2008.1504, May 2008, p. 808-809
4. G. Tanasie, M. Toth-Taşcǎu, F. Mirea, M. Dreucean, S. Anghel, L. Schluszer, C. Igna, Combined Bioimplants for Articular Defects Healing, Tissue Engineering, Part A, Vol. 14, number 5: 691-943. doi:10.1089/tea.2008.1504, May 2008, p. 825-826
Papers published in ISI proceedings
1. M.Toth-Tașcău, D.I.Stoia, Measured kinematical parameters versus approximation functions in evaluation of cervical spine mobility, Mathematics and Computers in Science Engineering, The 11th WSEAS International Conference on Sustainability in Science Engineering, (SSE'09), Timisoara, 2009, p.241-245, http://www.wseas.us/conferences/2009/timisoara/sse/
2. M.Toth-Tașcău, K.Menyhardt, D.I.Stoia, Robotic arm modelling and analysis, Annals of DAAAM for 2009& Proceedings of The 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education", 25-28th November 2009, Vienna, p.0789-07990, http://www.daaam.com/
3. D.I.Stoia, M.Toth-Tașcău, Modeling and manufacturing of an artificial intervertebral disc, Annals of DAAAM for 2009& Proceedings of The 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education", 25-28th November 2009, Vienna, p.0533-0534, http://www.daaam.com/
4. M. Dreucean, M.Toth-Tașcău, Part flow planning in a manufacturing cell based on Petri nets simulation, Annals of DAAAM for 2009& Proceedings of The 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education", 25-28th November 2009, Vienna, p.0585-0586, http://www.daaam.com/
5. M.Toth-Tașcău, M. Dreucean, L.Rusu, Biomechanical behavior of canine tibia based on bending tests and numerical analysis,5th International Symposium on Applied Computational Intelligence and Informatics, SACI 2009, May 28-29, Timișoara, ISBN 078-1-4244-4478-6, IEEE Catalog Number CFP 0945C-CDR, p.129-132, http://bmf.hu/conferences/saci2009/
6. M.Dreucean, M.Toth-Taşcău, L.Rusu, D.I.Stoia, K.Menyhardt, Engineering Aspects of the Osteoarticular Reconstruction with Stem Cells. Study on Animals, 9th WSEAS International Conference on Mathematics & Computers in Biology and Chemistry (MCBC’08) Bucharest, Romania, 24-26June 2008, ISBN 978-960-6766-75-6 pp. 128-131, Recent Advances in Biology and Medicine, A Series of Reference Books and Textbooks , http://www.wseas.org/conferences/2008/romania/mcbc/index.html
7. D.I.Stoia, M.Toth-Taşcău, Multipart 3D Reconstruction of a human cervical vertebra, 9th WSEAS International Conference on Automation and Information, (ICAI’08), Bucharest, Romania, 24-26June 2008, ISBN: 978-960-6766-77-0, pp. 170-174, Recent Advances In Electrical Engineering, A Series of Reference Books and Textbooks, http://www.wseas.org/conferences/2008/romania/icai/index.html
8. D.I.Stoia, M.Toth-Taşcău, Unicortical - Bicortical Behavior of a Hybrid Bone Screw, Annals of DAAAM for 2008 & Proceedings of The 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions", Trnava, 2008, p.1313-1314, http://www.daaam.com/
9. M.Dreucean, M.Toth-Taşcău, CAD/CAM Methods in the Customization of Medical Implants, Annals of DAAAM for 2008 & Proceedings of The 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions", Trnava, 2008, p.0441-0442, http://www.daaam.com/
10. D. Dragulescu, C. Stoicanescu, A.M. Creţu, M.Toth-Taşcău, M. Dreucean, Utilitarian Robots Acting in a Virtual Medical Center Scene, IIMTC 2005 proceedings of the IEEE Instrumentation and Measurement Technology Conference, Ottawa, Ontario, Canada, 16-19 mai 2005, vol.2, article number 1604373, p.1373-1377, IEEE Catalog Number 05CH37627C, ISBN 0-7803-8880-1, http://ewh.ieee.org/soc/im/imtc/imtcup/index.html
Papers published in BDI journals
1. Roxana Dascălu, C. Igna, Mirela Toth-Tascău, M. Sabău, Larisa Schuszler, K.Menyhardt, C. Luca, Humeral Head Ocd Healing Assessment On Dogs, Using Kinematic Analysis, Buletinul USAMV Cluj-Napoca, vol. 66, (2), 2009, pag. 189 -193, CNCSIS B+, cod 468, CABI's life sciences bibliographic database
2. D.I.Stoia, M.Toth-Tașcău, Harmonic versus evasive movements in cervical spine mobility, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume VIII(XVIII), 2009, p.1439-1443, CNCSIS B+, cod 564, ULRICH’S Periodicals Directory
3. M.Toth-Tașcău, D.Bugariu, L.Bereteu, Design of a total hip prosthesis, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume VIII(XVIII), 2009, p.859-864, CNCSIS B+, cod 564, ULRICH’S Periodicals Directory
4. T.Ioanovici, G.Mărginean, L.Bereteu, M.Toth-Tașcău, Influence of TiO2 scaling on corrosion resistance of Titanium implants, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume VIII(XVIII), 2009, p.1167-1172, CNCSIS B+, cod 564, ULRICH’S Periodicals Directory
5. R.Dascălu, C.Igna, M.Toth-Taşcău, M.Sabău, L.Schuszler, M.Şereş, K.Menyhardt, Kinematic variabiles to describe differences between normal dogs and dogs with osteochondritis dissecans of the humeral head, Buletin USAMV-CN. Bulletin of University of Agricultural Sciences and Veterinary Medicine Cluj-Napoca. Veterinary Medicine,Vol 65, No 2 (2008), pp. 160-165, Print ISSN 1843-5270; Electronic ISSN 1843-5378, http://journals.gotea.ro/veterinary/index, CNCSIS 468 B+, CABI's life sciences bibliographic database
6. D.Dragulescu, L.Rusu, M.Dreucean, M.Toth-Tascau, Stress and deformation analysis induced by dental implants in mandible, Rev Med Chir Soc Med Nat Iasi;110(1):232-5, 2006 Jan-Mar. ISSN 0300-8738, MEDLINE PubMed, http://bases.bireme.br/cgi-bin/wxislind.exe/iah/ncd/?&IsisScript=iah%2Fiah.xis&nextAction=lnk&lang=p&base=MEDLINE&exprSearch=+ex+E06.231.310.360%24+OR+E06.397.345%24+OR+E06.645.550.289.280.280%24+OR+06.780.314.310.360%24&indexSearch=MH#last
Papers published in BDI proceedings
1. D.I.Stoia, M.Toth-Tașcău, Cervical Spine Mobility Using 3D Ultrasound-Based Measuring System, International Conference on Advancements of Medicine and Healt Care through Technology, IFMBE, 2009, p.391-396, http://www.meditech.utcluj.ro/, Springer lnk, http://www.springer.com/engineering/biomedical+eng/book/978-3-642-04291-1
2. K. Menyhardt, D.I.Stoia, M.Toth-Tașcău, M. Dreucean, Electromyographic Response for Grip Exercise, International Conference on Advancements of Medicine and Healt Care through Technology, IFMBE, 2009, p.93-96, http://www.meditech.utcluj.ro/, Springer lnk, http://www.springer.com/engineering/biomedical+eng/book/978-3-642-04291-1
3. V. Morcovescu, D. Drăgulescu, M.Toth-Taşcău, The dynamic study of the human lower limb during normal gait, Proceenings of the Ninth ISB Symposium on 3D Analysis of Human Movement, Valenciennes, June 28-30 2006, paper no. 62, Journal Human Movement Science ISSN: 0167-9457, Proceedings on CD, BD Scirus
Papers published in national and international journals
1. S.Răducan, M.Toth-Taşcău, R.Prejbeanu, D.Vermeşan, D.Bugariu, D.I.Stoia, P.Botez, O.Creţu, Gait analysis in total knee joint arthroplasty patients, Revista de Ortopedie şi Traumatologie a Asociaţiei de Ortopedie Româno-Italiano-Spaniole, Nr.3(15)/2009, p.34-37, http://www.asoris.ro/, CNCSIS B, cod 217
2. Gh. Luca, M. Toth-Tașcău, C. Decianu, Theoretical study of serve in tennis, Buletinul Științific al Universității Politehnica din Timișoara, Seria Mecanică, Tom 54(68), Fasc. 3, 2009, ISSN 1224-6077, p. 9-14, http://www.eng.upt.ro/buletin, CNCSIS B, cod 301
3. M. Krepelka, M. Toth-Tașcău, Design of customized hip prosthesis, Buletinul Științific al Universității Politehnica din Timișoara, Seria Mecanică, Tom 54(68), Fasc. 4, 2009, ISSN 1224-6077, p. 5-10, http://www.eng.upt.ro/buletin, CNCSIS B, cod 301
4. R. Dascălu, C. Igna, M. Toth-Tascău, M. Sabău, L.Schuszler, K.Menyhardt, Healing evaluation of stifle joint OCD on dogs using kinematic analysis, Lucrări Stiințifice MEDICINĂ VETERINARĂ VOL. XLII (2), 2009, Timisoara, ISSN: 1221-5295, p. 128-134, http://www.usab-tm.ro/index.php?id=299, B CNCSIS B, cod 259
5. M.Dreucean, M.Toth-Taşcău, Sodobne tehnologije za izdelavo kovinskih biomedicinskih vsadkov, IRT 3000 inovacije razvoj tehnologije, No 17/2008, p. 78-83, http://www.irt3000.hr/eng/index.php
6. D. Maliţa, M.Toth-Taşcău, M.Dreucean, D.Vermeșan, R.Prejbeanu, I.Malița, H.Vermeșan, M.Mogoșeanu, D.I.Stoia, O.Ghiba, Analiza corelaţiilor dintre studiul biomecanic şi aspectele imagistice asupra unui caz de pierdere de cauză infecţioasă a endoprotezei de şold, Revista de Ortopedie şi Traumatologie a Asociaţiei de Ortopedie Româno-Italiano-Spaniole, Timişoara, Nr. 1/2(12)2008, ISSN 1454-6213, p. 59-66, http://www.asoris.ro/, CNCSIS C, cod 217
7. G.Tanasie, RF.Tatu, S.Anghel, V.Paunescu, M.Buncean, M.Toth-Tascau, C.Tatu, M.Dreucean, C.Bunu, C.Igna, V.Paunescu, Stem Cells Based Articular Reconstruction In Animal Models, Fiziologia. Physiology, Official Journal of the Romanian Society of Physiological Sciences: Physiology "Physiology - from experiment to medical practice", Proceedings of the The 10th Congress of the Romanian Society of Physiological Sciences, Cluj-Napoca, June 5th - 7th , 2008, ISSN 1223-2076, nr 218.2(58) 2008, http://revista_fiziologia.umft.ro/, CNCSIS B, cod 240
8. M.Toth-Taşcău, D.I.Stoia, M.Dreucean, Gait analysis using Zebris measurement system, Fiziologia. Physiology, Official Journal of the Romanian Society of Physiological Sciences, Vol.17 Nr.3(55) 2007, ISSN 1223-2076, pp.11-14, http://revista_fiziologia.umft.ro/, CNCSIS B, cod 240
9. G.Tanasie, C.Tatu, C.Bunu, M.Toth-Tascau, C.Igna, R.Vasilco, M.Cristea, V.Paunescu, Stem cells and osteoarticular regeneration, Fiziologia. Physiology, Official Journal of the Romanian Society of Physiological Sciences, Vol.17 Nr.3(55) 2007, ISSN 1223-2076, pp.7-10 1223- 2076, http://revista_fiziologia.umft.ro/, CNCSIS B, cod 240
10. M.Toth-Taşcău, G. Petropoulos, Research and Development in Mechanical Industry, Journal IMK 14 Istrazivanje i razvoj, Godina XII, Broj (24-25) 1-2/2006, p. 235-238, ISSN 0354-6829, Journal of IMK-14 Research and Development: ISSN 0354-6829. Publisher: Institute of IMK "14. October" of Krusevac (Serbia), http://scindeks.nb.rs/issue.aspx?issue=6371&lang=en, SCIndeks Serbian Citation Index
11. M.Toth-Taşcău, D.Drăgulescu, M. Dreucean, Improving the path planning simulation based on visibility graph method, Machinebuilding and Electrical Engineering, Publ. Mashinintelekt-Ltd, Bulgaria, an LV, nr. 4-5, 2006, p. 25-27, ISSN 0025-455X, Technical Union oh Mechanical Engineering Bulgaria
12. D.Drăgulescu, M.Toth-Taşcău, K. Menyhardt, I. Stoia, Simulating 3D active workspace of an antropomorphic shaped end effector, Machinebuilding and Electrical Engineering, Publ. Mashinintelekt-Ltd, Bulgaria, an LV, nr. 4-5, 2006, p. 28-30, ISSN 0025-455X, Technical Union oh Mechanical Engineering Bulgaria
13. D.Drăgulescu, C. Stoicănescu, M.Toth-Taşcău, M. Dreucean, Mobile robot motion in a virtual laboratory, Machinebuilding and Electrical Engineering, Publ. Mashinintelekt-Ltd, Bulgaria, an LV, nr. 4-5, 2006, p. 31-34, ISSN 0025-455X, Technical Union oh Mechanical Engineering Bulgaria
14. M. Dreucean, D.Drăgulescu, M.Toth-Taşcău, Simulation in evaluation and control of manufacturing systems, Machinebuilding and Electrical Engineering, Publ. Mashinintelekt-Ltd, Bulgaria, an LV, nr. 4-5, 2006, p. 43-46, ISSN 0025-455X, Technical Union oh Mechanical Engineering Bulgaria
15. D. Drăgulescu, V. Morcovescu, M.Toth-Taşcău, The influence of external motions on the human lower limb’s joints, Scientific Bulletin of the Politehnica University of Timisoara, Transactions on Mechanics, Special Issue, Tom 50(64), 2005, ISSN 1224-6077, p. 19-22, CNCSIS B, cod 301
16. M.Toth-Taşcău, L.Rusu, External distractor for cranio-facial deficiences, Scientific Bulletin of the Politehnica University of Timisoara, Transactions on Mechanics, Special Issue, Tom 50(64), 2005, ISSN 1224-6077, p. 106-110, CNCSIS B, cod 301
Papers published in proceedings of international conferences
1. M.Toth-Taşcău, D.I.Stoia, M.Dreucean, D.Maliţa, H.Vermeşan, R.Prejbeanu, D.Vermeşan, A Combined Biomechanical Analysis of a Patient Submitted to a Hip Implant Revision, International Conference on Bioengineering & Biomaterials: IC2B’2009, Meknes – Morocco
2. M.Toth-Taşcău, M.Dreucean, D.I.Stoia, K.Menyhardt, L.Rusu, C.Igna, R.Dascălu, M.Sabău, G.Tănasie, Experimental Kinematical Analysis Of Dogs, International Conference on Bioengineering & Biomaterials: IC2B’2009, Meknes - Morocco
3. M.Toth-Taşcău, M.Dreucean, H.Vermeşan, D.I.Stoia, D.Maliţa, D.Vermeşan, R.Prejbeanu, L.Rusu, O.Ghiba, A combined biomechanical -radiological analysis of a patient needing a hip implant revision, 34 Jupiter Conference, NU ROBOTI FTS, Beograd, June 2008, ISBN 978-86-7083-628-0, p.3.81-3.86
4. G.Rusu, M.Toth-Taşcău, G.Bandur, L.Rusu, Mechanical characteristics of some poly(methyl methacrylate) based polymers with biodegradable potential, 34 Jupiter Conference, NU ROBOTI FTS, Beograd, June 2008, ISBN 978-86-7083-628-0, pp.3.87-3.92
5. D.I.Stoia, M.Toth-Taşcău, M.Dreucean, L.Rusu, Modeling and numerical analysis of an implanted cervical functional unit, 3rd International Conference "From Scientific Computing to Computational Engineering", 3-IC-SCCE, Athens, 9-11 July 2008, Vol. II, p.399-405, ISBN 978-960-530-098-2, Organized by LFME-Laboratory of Fluid Mechanics and Energy
6. K.Menyhardt, M.Toth-Tascău, Mobility study of an upper limb prosthesis, 3rd International Conference "From Scientific Computing to Computational Engineering", 3-IC-SCCE, Athens, 9-11 July 2008, Vol. II, p.409-416, ISBN 978-960-530-098-2, Organized by LFME-Laboratory of Fluid Mechanics and Energy
7. M.Toth-Tascău, M.Dreucean, L.Rusu, C.Igna, R.Dascalu, M.Sabǎu, Mechanical Properties Evaluation of Canine Bones using Torsion and Bending Tests, 8th International Conference Research and Development in Mechanical Industry RaDMI 2008, 14 – 17 September 2008, Užice, Serbia, ISBN 978-86-83803-24-3, p.95-104, Plenary session (invited papers)
8. M.Toth-Tascău, M.Dreucean, G.Rusu, L.Rusu, Quality Assurance Based On Interlaboratory Comparison In Ciducos Testing Laboratory, 8th International Conference Research and Development in Mechanical Industry RaDMI 2008, 14 – 17 September 2008, Užice, Serbia, ISBN 978-86-83803-24-3, p.611-617. Session B - Maintenance and effectiveness of technical systems, quality management, ISO 9000, ISO 14000, TQM and management in mechanical engineering
9. M.Dreucean, M.Toth-Taşcău, C.Florea, Nanoindentation on Atomic Force Microscope, 1st International Conference Science and Higher Education in Function of Sustainable Development SED 2008, 17 - 19. September 2008, Užice, Serbia, ISBN 978-86-83573-07-3, p.1-6, Plenary session (invited papers)
10. D.Malita, F.Birsasteanu, S.Dunarintu, M.Toth-Tascau, I.Malita, The combined analyses of biomechanics and helical ct imaging in septic complicated hip arthroplasty, Congress "6th Balkan Congress of Radiology", Belgrade, Serbia, November 20-22, 2008 organized by: Balkan Society of Radiology, www.balkancongress.org/?p=scientific_program_posters
11. D.I.Stoia, M.Toth-Taşcău, C. Precup, Stress Acting at the Bone-Screw interface of an Implanted Cervical Segment, Proceedings of the 8th International Conference on Technical Informatics – CONTI’2008, Vol.1, Automation and Applied Informatics, ISBN 1844-539X, p.179-182
12. D.I.Stoia, M.Toth-Taşcău, L.Rusu, Biomechanical Behavior of a Cervical Fixation Screw, Third International Conference on Biomaterials and Medical Devices (BiomMedD'2008), Bucharest, Romania, November 13-16th, 2008, p.128-129
13. M.Toth-Tascău, M.Dreucean, L.Rusu, D.I.Stoia, G.Tanasie, C.Igna, R.Dascalu, M.Sabǎu, Mechanical Testing of healthy canine bones, Third International Conference on Biomaterials and Medical Devices (BiomMedD'2008), Bucharest, Romania, November 13-16th, 2008, p.130-131
14. K.Menyhardt, M.Toth-Taşcău, Low cost intelligent upper limb prosthesis, Bulletin of the Transilvania University of Brasov, Proceedings of the International Conference „ROBOTICS’08” 13 - 14 November, 2008, Braşov, Vol. 15(50) – Series A, ISSN 1223-9631, Special issue No.1, Vol. II, 2008, ISBN 978-973-598-387-1, Volume 2, pp.761-766, Published by Transilvania University Press Brasov
15. M.Toth-Tascau, M.Dreucean, Path planning of a mobile robot using visibility graph method, Bulletin of the Transilvania University of Brasov, Proceedings of the International Conference „ROBOTICS’08” 13 - 14 November, 2008, Braşov, Vol. 15(50) – Series A, ISSN 1223-9631, Special issue No.1, Vol. II, 2008, ISBN 978-973-598-387-1, Volume 2, pp.495-500, Published by Transilvania University Press Brasov
16. M.Toth-Tascau, D.Dragulescu, C.Vigaru, M.Dreucean, Quality Management System of Lopifo Laboratory, 33 Jupiter Conference, Zlatibor, Serbia, 15-17 mai 2007, ISBN 978-86-7083-593-1, p.5.48-5.51
17. K.Menyhardt, M.Toth-Tascau, Estimation of robot positioning errors, 33 Jupiter Conference, Zlatibor, Serbia, 15-17 mai 2007, ISBN 978-86-7083-593-1, p.3.49-3.54
18. M.Toth-Tascau, D.Dragulescu, C.Vigaru, M.Dreucean, Quality and risk management in the LOPIFO Laboratory, 7th International Conference “Research and Development in Mechanical Industry” RaDMI 2007, 16-20 September 2007, Belgrade, Serbia, ISBN-10 86-83803-22-8 and ISBN 86-83803-22-4
19. D.I.Stoia, M.Toth-Tascau, M.Dreucean, Evaluation methods of the gait parameters, 7th International Conference “Research and Development in Mechanical Industry” RaDMI 2007, 16-20 September 2007, Belgrade, Serbia, ISBN-10 86-83803-22-8 and ISBN 86-83803-22-4
20. D.I.Stoia, M.Toth-Tascau, C.Vigaru, Biomechanical behavior of the lumbar spine, The 2nd International conference “Computational Mechanics and Virtual Engineering” COMEC 2007, Brasov, 11-13 Octomber 2007, ISBN 978-973-598-117-7, p.435-438
21. M.Toth-Tascau, D.I.Stoia, M.Dreucean, Protocol for gait analysis based on laboratory investigations, The 2nd International conference “Computational Mechanics and Virtual Engineering” COMEC 2007, Brasov, 11-13 Octomber 2007, ISBN 978-973-598-117-7, p.527-532
22. M.Toth-Taşcău, D.Drăgulescu, M. Dreucean, Improving the path planning simulation based on visibility graph method, MECHANICAL ENGINEERING TECHNOLOGIES`06, V International Congress, 20-23.09.2006 Varna, BULGARIA, Section I Virtual Engineering. In Automation. Management and engineering, Volume 5/88 September 2006, ISSN 1310-3946, pp. 68-70
23. D.Drăgulescu, M.Toth-Taşcău, K. Menyhardt, I. Stoia, Simulating 3D active workspace of an antropomorphic shaped end effector, MECHANICAL ENGINEERING TECHNOLOGIES`06, V International Congress, 20-23.09.2006 Varna, BULGARIA, Section I Virtual Engineering. In Automation. Management and engineering, Volume 5/88 September 2006, ISSN 1310-3946, p. 18-20
24. D.Drăgulescu, C. Stoicănescu, M.Toth-Taşcău, M. Dreucean, Mobile robot motion in a virtual laboratory, MECHANICAL ENGINEERING TECHNOLOGIES`06, V International Congress, 20-23.09.2006 Varna, BULGARIA, Section I Virtual Engineering. In Automation. Management and engineering, Volume 5/88 September 2006, ISSN 1310-3946, p. 71-74
25. M. Dreucean, D.Drăgulescu, M.Toth-Taşcău, Simulation in evaluation and control of manufacturing systems, MECHANICAL ENGINEERING TECHNOLOGIES`06, V International Congress, 20-23.09.2006 Varna, BULGARIA, Section I Virtual Engineering. In Automation. Management and engineering, Volume 5/88 September 2006, ISSN 1310-3946, p. 64-67
26. M.Toth-Taşcău, D.Drăgulescu, M. Dreucean, C. Vigaru, Quality management of CIDUCOS testing laboratory, Proceedings Simpozijum o operacionim istrazivanjima (Proceedings of XXXIII Conference on Operation Research) SYM-OP-IS 2006, Banja Koviljaca, 3-6 Oct. 2006. Editor:Dragan Radojevics, Beograd, Institut Mihajlo Pupin, ISBN 86-82183-07-2, p. 105-108.
27. D.Drăgulescu, C. Stoicănescu, M.Toth-Taşcău, M. Dreucean, Path planning of a mobile robot in a virtual laboratory, 6th International Conference Research and Development in Mechanical Industry RaDMI 2006, Papers from Sessions A,B,C,D,E, Budva, Muntenegro, 13-17 September 2006, ISBN-10 86-83803-21-X and ISBN-13 978-86-83803-21-7, p. 1-6
28. M. Dreucean, D. Drăgulescu, M.Toth-Taşcău, Computing the uncertainty in spectrometric determination, 6th International Conference Research and Development in Mechanical Industry RaDMI 2006, Papers from Sessions A,B,C,D,E, Budva, Muntenegro, 13-17 September 2006, ISBN-10 86-83803-21-X and ISBN-13 978-86-83803-21-7, p. 1-4
29. M.Toth-Taşcău, D. Drăgulescu, M. Dreucean, C. Vigaru, Quality management of CIDUCOS testing laboratory, 6th International Conference Research and Development in Mechanical Industry RaDMI 2006, Papers from Sessions A,B,C,D,E, Budva, Muntenegro, 13-17 September 2006, ISBN-10 86-83803-21-X and ISBN-13 978-86-83803-21-7, p. 1-6
30. D.Drăgulescu, L. Rusu, M.Toth-Taşcău, About the Behavior of Fixation Devices on the Fractured Mandible, Proceedings of 3rd Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, Timisoara, May 25-26, 2006, ISBN 963 7154 46 9, p. 148-153
31. D. Drăgulescu, L.Rusu, M.Toth-Taşcău, E. Urtilă, Study of a custom implant for maxillofacial surgery, Proceedings International Conference on Biomaterials & Medical Devices BiomMedD’2006, November 9-11, 2006, ISBN 973-718-566-8, ISBN 978-973-718-566-2, p.97
32. M.Toth-Taşcău, C. Vigaru, D. Drăgulescu, M. Dreucean, Testing system for maxilofacial surgical implants, Proceedings International Conference on Biomaterials & Medical Devices BiomMedD’2006, November 9-11, 2006, ISBN 973-718-566-8, ISBN 978-973-718-566-2, p.287 Papers published in proceedings of national conferences 1. L.Rusu, M.Toth-Taşcău, C.Vigaru, The dynamic analysis of a simplified prosthesis of the lower limb, Simpozionul National de Biomateriale "Biomateriale si Aplicatii Medico-Chirurgicale", SNB 2009, Bucuresti, 21-22 Oct. 2009, ISBN 978-606-521-404-0, p.32-33
Papers published in proceedings of national conferences
1. L.Rusu, M.Toth-Taşcău, C.Vigaru, The dynamic analysis of a simplified prosthesis of the lower limb, Simpozionul National de Biomateriale "Biomateriale si Aplicatii Medico-Chirurgicale", SNB 2009, Bucuresti, 21-22 Oct. 2009, ISBN 978-606-521-404-0, p.32-33
2. D.I.Stoia, M.Toth-Taşcău, C.Vigaru, K.Menyhardt, Biomechanical analysis of the assembly upper limb - force amplifier exoskeleton, Simpozionul National de Biomateriale "Biomateriale si Aplicatii Medico-Chirurgicale", SNB 2009, Bucuresti, 21-22 Oct. 2009, ISBN 978-606-521-404-0, p.30-31
1. Tașcău, M. Dreucean, Robotics Elements, "Politehnica" Publisher, Timişoara, 2008
2. M. Toth-Taşcău, D. Drăgulescu, Robot motion planning and generation, Planificarea şi generarea mişcării roboţilor, "Orizonturi Universitare" Publisher, Timişoara, 2002
3. D. Drăgulescu, M. Toth-Taşcău, Mecanica, "Orizonturi Universitare" Publisher, Timişoara, 2002
4. D. Drăgulescu, D. Iosif, M. Toth-Taşcău, Robot motion planning by artificial vision, Technical Publisher, Bucharest, 2002
5. M. Toth-Taşcău, Kinematics and Dynamics of intelligent robots, "Politehnica" Publisher, Timisoara, 2001
Papers published in ISI journals
1. C. Precup, M. Ifrim, M. Toth-Taşcǎu, L. Rusu, Experimental forensic biometric study on the femur bone resistance as compared to the upper limb long bones resistance, Romanian Journal of Legal Medicine, (3), 2009, p.221-226
2. D.I. Stoia, N. Faur, M. Toth-Tașcău, L. Culea, In Vitro Experimental Testing of a Cervical Implanted Unit, Advances in Strength of Materials, Trans Tech Publications Ltd Switzerland, Key Engineering Materials, Vol. 399, ISSN 1013-9826, 2009, p.205-210
3. M. Dreucean, G. Tanasie, M. Toth-Taşcǎu, H. Boss, B. Hoinoiu, D. Poenaru, Articular Rehabilitation Controlled by Image Processing-Study on Animals, Tissue Engineering, Part A, Vol. 14, number 5: 691-943. doi:10.1089/tea.2008.1504, May 2008, p. 808-809
4. G. Tanasie, M. Toth-Taşcǎu, F. Mirea, M. Dreucean, S. Anghel, L. Schluszer, C. Igna, Combined Bioimplants for Articular Defects Healing, Tissue Engineering, Part A, Vol. 14, number 5: 691-943. doi:10.1089/tea.2008.1504, May 2008, p. 825-826
Papers published in ISI proceedings
1. M.Toth-Tașcău, D.I.Stoia, Measured kinematical parameters versus approximation functions in evaluation of cervical spine mobility, Mathematics and Computers in Science Engineering, The 11th WSEAS International Conference on Sustainability in Science Engineering, (SSE'09), Timisoara, 2009, p.241-245, http://www.wseas.us/conferences/2009/timisoara/sse/
2. M.Toth-Tașcău, K.Menyhardt, D.I.Stoia, Robotic arm modelling and analysis, Annals of DAAAM for 2009& Proceedings of The 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education", 25-28th November 2009, Vienna, p.0789-07990, http://www.daaam.com/
3. D.I.Stoia, M.Toth-Tașcău, Modeling and manufacturing of an artificial intervertebral disc, Annals of DAAAM for 2009& Proceedings of The 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education", 25-28th November 2009, Vienna, p.0533-0534, http://www.daaam.com/
4. M. Dreucean, M.Toth-Tașcău, Part flow planning in a manufacturing cell based on Petri nets simulation, Annals of DAAAM for 2009& Proceedings of The 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education", 25-28th November 2009, Vienna, p.0585-0586, http://www.daaam.com/
5. M.Toth-Tașcău, M. Dreucean, L.Rusu, Biomechanical behavior of canine tibia based on bending tests and numerical analysis,5th International Symposium on Applied Computational Intelligence and Informatics, SACI 2009, May 28-29, Timișoara, ISBN 078-1-4244-4478-6, IEEE Catalog Number CFP 0945C-CDR, p.129-132, http://bmf.hu/conferences/saci2009/
6. M.Dreucean, M.Toth-Taşcău, L.Rusu, D.I.Stoia, K.Menyhardt, Engineering Aspects of the Osteoarticular Reconstruction with Stem Cells. Study on Animals, 9th WSEAS International Conference on Mathematics & Computers in Biology and Chemistry (MCBC’08) Bucharest, Romania, 24-26June 2008, ISBN 978-960-6766-75-6 pp. 128-131, Recent Advances in Biology and Medicine, A Series of Reference Books and Textbooks , http://www.wseas.org/conferences/2008/romania/mcbc/index.html
7. D.I.Stoia, M.Toth-Taşcău, Multipart 3D Reconstruction of a human cervical vertebra, 9th WSEAS International Conference on Automation and Information, (ICAI’08), Bucharest, Romania, 24-26June 2008, ISBN: 978-960-6766-77-0, pp. 170-174, Recent Advances In Electrical Engineering, A Series of Reference Books and Textbooks, http://www.wseas.org/conferences/2008/romania/icai/index.html
8. D.I.Stoia, M.Toth-Taşcău, Unicortical - Bicortical Behavior of a Hybrid Bone Screw, Annals of DAAAM for 2008 & Proceedings of The 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions", Trnava, 2008, p.1313-1314, http://www.daaam.com/
9. M.Dreucean, M.Toth-Taşcău, CAD/CAM Methods in the Customization of Medical Implants, Annals of DAAAM for 2008 & Proceedings of The 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions", Trnava, 2008, p.0441-0442, http://www.daaam.com/
10. D. Dragulescu, C. Stoicanescu, A.M. Creţu, M.Toth-Taşcău, M. Dreucean, Utilitarian Robots Acting in a Virtual Medical Center Scene, IIMTC 2005 proceedings of the IEEE Instrumentation and Measurement Technology Conference, Ottawa, Ontario, Canada, 16-19 mai 2005, vol.2, article number 1604373, p.1373-1377, IEEE Catalog Number 05CH37627C, ISBN 0-7803-8880-1, http://ewh.ieee.org/soc/im/imtc/imtcup/index.html
Papers published in BDI journals
1. Roxana Dascălu, C. Igna, Mirela Toth-Tascău, M. Sabău, Larisa Schuszler, K.Menyhardt, C. Luca, Humeral Head Ocd Healing Assessment On Dogs, Using Kinematic Analysis, Buletinul USAMV Cluj-Napoca, vol. 66, (2), 2009, pag. 189 -193, CNCSIS B+, cod 468, CABI's life sciences bibliographic database
2. D.I.Stoia, M.Toth-Tașcău, Harmonic versus evasive movements in cervical spine mobility, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume VIII(XVIII), 2009, p.1439-1443, CNCSIS B+, cod 564, ULRICH’S Periodicals Directory
3. M.Toth-Tașcău, D.Bugariu, L.Bereteu, Design of a total hip prosthesis, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume VIII(XVIII), 2009, p.859-864, CNCSIS B+, cod 564, ULRICH’S Periodicals Directory
4. T.Ioanovici, G.Mărginean, L.Bereteu, M.Toth-Tașcău, Influence of TiO2 scaling on corrosion resistance of Titanium implants, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume VIII(XVIII), 2009, p.1167-1172, CNCSIS B+, cod 564, ULRICH’S Periodicals Directory
5. R.Dascălu, C.Igna, M.Toth-Taşcău, M.Sabău, L.Schuszler, M.Şereş, K.Menyhardt, Kinematic variabiles to describe differences between normal dogs and dogs with osteochondritis dissecans of the humeral head, Buletin USAMV-CN. Bulletin of University of Agricultural Sciences and Veterinary Medicine Cluj-Napoca. Veterinary Medicine,Vol 65, No 2 (2008), pp. 160-165, Print ISSN 1843-5270; Electronic ISSN 1843-5378, http://journals.gotea.ro/veterinary/index, CNCSIS 468 B+, CABI's life sciences bibliographic database
6. D.Dragulescu, L.Rusu, M.Dreucean, M.Toth-Tascau, Stress and deformation analysis induced by dental implants in mandible, Rev Med Chir Soc Med Nat Iasi;110(1):232-5, 2006 Jan-Mar. ISSN 0300-8738, MEDLINE PubMed, http://bases.bireme.br/cgi-bin/wxislind.exe/iah/ncd/?&IsisScript=iah%2Fiah.xis&nextAction=lnk&lang=p&base=MEDLINE&exprSearch=+ex+E06.231.310.360%24+OR+E06.397.345%24+OR+E06.645.550.289.280.280%24+OR+06.780.314.310.360%24&indexSearch=MH#last
Papers published in BDI proceedings
1. D.I.Stoia, M.Toth-Tașcău, Cervical Spine Mobility Using 3D Ultrasound-Based Measuring System, International Conference on Advancements of Medicine and Healt Care through Technology, IFMBE, 2009, p.391-396, http://www.meditech.utcluj.ro/, Springer lnk, http://www.springer.com/engineering/biomedical+eng/book/978-3-642-04291-1
2. K. Menyhardt, D.I.Stoia, M.Toth-Tașcău, M. Dreucean, Electromyographic Response for Grip Exercise, International Conference on Advancements of Medicine and Healt Care through Technology, IFMBE, 2009, p.93-96, http://www.meditech.utcluj.ro/, Springer lnk, http://www.springer.com/engineering/biomedical+eng/book/978-3-642-04291-1
3. V. Morcovescu, D. Drăgulescu, M.Toth-Taşcău, The dynamic study of the human lower limb during normal gait, Proceenings of the Ninth ISB Symposium on 3D Analysis of Human Movement, Valenciennes, June 28-30 2006, paper no. 62, Journal Human Movement Science ISSN: 0167-9457, Proceedings on CD, BD Scirus
Papers published in national and international journals
1. S.Răducan, M.Toth-Taşcău, R.Prejbeanu, D.Vermeşan, D.Bugariu, D.I.Stoia, P.Botez, O.Creţu, Gait analysis in total knee joint arthroplasty patients, Revista de Ortopedie şi Traumatologie a Asociaţiei de Ortopedie Româno-Italiano-Spaniole, Nr.3(15)/2009, p.34-37, http://www.asoris.ro/, CNCSIS B, cod 217
2. Gh. Luca, M. Toth-Tașcău, C. Decianu, Theoretical study of serve in tennis, Buletinul Științific al Universității Politehnica din Timișoara, Seria Mecanică, Tom 54(68), Fasc. 3, 2009, ISSN 1224-6077, p. 9-14, http://www.eng.upt.ro/buletin, CNCSIS B, cod 301
3. M. Krepelka, M. Toth-Tașcău, Design of customized hip prosthesis, Buletinul Științific al Universității Politehnica din Timișoara, Seria Mecanică, Tom 54(68), Fasc. 4, 2009, ISSN 1224-6077, p. 5-10, http://www.eng.upt.ro/buletin, CNCSIS B, cod 301
4. R. Dascălu, C. Igna, M. Toth-Tascău, M. Sabău, L.Schuszler, K.Menyhardt, Healing evaluation of stifle joint OCD on dogs using kinematic analysis, Lucrări Stiințifice MEDICINĂ VETERINARĂ VOL. XLII (2), 2009, Timisoara, ISSN: 1221-5295, p. 128-134, http://www.usab-tm.ro/index.php?id=299, B CNCSIS B, cod 259
5. M.Dreucean, M.Toth-Taşcău, Sodobne tehnologije za izdelavo kovinskih biomedicinskih vsadkov, IRT 3000 inovacije razvoj tehnologije, No 17/2008, p. 78-83, http://www.irt3000.hr/eng/index.php
6. D. Maliţa, M.Toth-Taşcău, M.Dreucean, D.Vermeșan, R.Prejbeanu, I.Malița, H.Vermeșan, M.Mogoșeanu, D.I.Stoia, O.Ghiba, Analiza corelaţiilor dintre studiul biomecanic şi aspectele imagistice asupra unui caz de pierdere de cauză infecţioasă a endoprotezei de şold, Revista de Ortopedie şi Traumatologie a Asociaţiei de Ortopedie Româno-Italiano-Spaniole, Timişoara, Nr. 1/2(12)2008, ISSN 1454-6213, p. 59-66, http://www.asoris.ro/, CNCSIS C, cod 217
7. G.Tanasie, RF.Tatu, S.Anghel, V.Paunescu, M.Buncean, M.Toth-Tascau, C.Tatu, M.Dreucean, C.Bunu, C.Igna, V.Paunescu, Stem Cells Based Articular Reconstruction In Animal Models, Fiziologia. Physiology, Official Journal of the Romanian Society of Physiological Sciences: Physiology "Physiology - from experiment to medical practice", Proceedings of the The 10th Congress of the Romanian Society of Physiological Sciences, Cluj-Napoca, June 5th - 7th , 2008, ISSN 1223-2076, nr 218.2(58) 2008, http://revista_fiziologia.umft.ro/, CNCSIS B, cod 240
8. M.Toth-Taşcău, D.I.Stoia, M.Dreucean, Gait analysis using Zebris measurement system, Fiziologia. Physiology, Official Journal of the Romanian Society of Physiological Sciences, Vol.17 Nr.3(55) 2007, ISSN 1223-2076, pp.11-14, http://revista_fiziologia.umft.ro/, CNCSIS B, cod 240
9. G.Tanasie, C.Tatu, C.Bunu, M.Toth-Tascau, C.Igna, R.Vasilco, M.Cristea, V.Paunescu, Stem cells and osteoarticular regeneration, Fiziologia. Physiology, Official Journal of the Romanian Society of Physiological Sciences, Vol.17 Nr.3(55) 2007, ISSN 1223-2076, pp.7-10 1223- 2076, http://revista_fiziologia.umft.ro/, CNCSIS B, cod 240
10. M.Toth-Taşcău, G. Petropoulos, Research and Development in Mechanical Industry, Journal IMK 14 Istrazivanje i razvoj, Godina XII, Broj (24-25) 1-2/2006, p. 235-238, ISSN 0354-6829, Journal of IMK-14 Research and Development: ISSN 0354-6829. Publisher: Institute of IMK "14. October" of Krusevac (Serbia), http://scindeks.nb.rs/issue.aspx?issue=6371&lang=en, SCIndeks Serbian Citation Index
11. M.Toth-Taşcău, D.Drăgulescu, M. Dreucean, Improving the path planning simulation based on visibility graph method, Machinebuilding and Electrical Engineering, Publ. Mashinintelekt-Ltd, Bulgaria, an LV, nr. 4-5, 2006, p. 25-27, ISSN 0025-455X, Technical Union oh Mechanical Engineering Bulgaria
12. D.Drăgulescu, M.Toth-Taşcău, K. Menyhardt, I. Stoia, Simulating 3D active workspace of an antropomorphic shaped end effector, Machinebuilding and Electrical Engineering, Publ. Mashinintelekt-Ltd, Bulgaria, an LV, nr. 4-5, 2006, p. 28-30, ISSN 0025-455X, Technical Union oh Mechanical Engineering Bulgaria
13. D.Drăgulescu, C. Stoicănescu, M.Toth-Taşcău, M. Dreucean, Mobile robot motion in a virtual laboratory, Machinebuilding and Electrical Engineering, Publ. Mashinintelekt-Ltd, Bulgaria, an LV, nr. 4-5, 2006, p. 31-34, ISSN 0025-455X, Technical Union oh Mechanical Engineering Bulgaria
14. M. Dreucean, D.Drăgulescu, M.Toth-Taşcău, Simulation in evaluation and control of manufacturing systems, Machinebuilding and Electrical Engineering, Publ. Mashinintelekt-Ltd, Bulgaria, an LV, nr. 4-5, 2006, p. 43-46, ISSN 0025-455X, Technical Union oh Mechanical Engineering Bulgaria
15. D. Drăgulescu, V. Morcovescu, M.Toth-Taşcău, The influence of external motions on the human lower limb’s joints, Scientific Bulletin of the Politehnica University of Timisoara, Transactions on Mechanics, Special Issue, Tom 50(64), 2005, ISSN 1224-6077, p. 19-22, CNCSIS B, cod 301
16. M.Toth-Taşcău, L.Rusu, External distractor for cranio-facial deficiences, Scientific Bulletin of the Politehnica University of Timisoara, Transactions on Mechanics, Special Issue, Tom 50(64), 2005, ISSN 1224-6077, p. 106-110, CNCSIS B, cod 301
Papers published in proceedings of international conferences
1. M.Toth-Taşcău, D.I.Stoia, M.Dreucean, D.Maliţa, H.Vermeşan, R.Prejbeanu, D.Vermeşan, A Combined Biomechanical Analysis of a Patient Submitted to a Hip Implant Revision, International Conference on Bioengineering & Biomaterials: IC2B’2009, Meknes – Morocco
2. M.Toth-Taşcău, M.Dreucean, D.I.Stoia, K.Menyhardt, L.Rusu, C.Igna, R.Dascălu, M.Sabău, G.Tănasie, Experimental Kinematical Analysis Of Dogs, International Conference on Bioengineering & Biomaterials: IC2B’2009, Meknes - Morocco
3. M.Toth-Taşcău, M.Dreucean, H.Vermeşan, D.I.Stoia, D.Maliţa, D.Vermeşan, R.Prejbeanu, L.Rusu, O.Ghiba, A combined biomechanical -radiological analysis of a patient needing a hip implant revision, 34 Jupiter Conference, NU ROBOTI FTS, Beograd, June 2008, ISBN 978-86-7083-628-0, p.3.81-3.86
4. G.Rusu, M.Toth-Taşcău, G.Bandur, L.Rusu, Mechanical characteristics of some poly(methyl methacrylate) based polymers with biodegradable potential, 34 Jupiter Conference, NU ROBOTI FTS, Beograd, June 2008, ISBN 978-86-7083-628-0, pp.3.87-3.92
5. D.I.Stoia, M.Toth-Taşcău, M.Dreucean, L.Rusu, Modeling and numerical analysis of an implanted cervical functional unit, 3rd International Conference "From Scientific Computing to Computational Engineering", 3-IC-SCCE, Athens, 9-11 July 2008, Vol. II, p.399-405, ISBN 978-960-530-098-2, Organized by LFME-Laboratory of Fluid Mechanics and Energy
6. K.Menyhardt, M.Toth-Tascău, Mobility study of an upper limb prosthesis, 3rd International Conference "From Scientific Computing to Computational Engineering", 3-IC-SCCE, Athens, 9-11 July 2008, Vol. II, p.409-416, ISBN 978-960-530-098-2, Organized by LFME-Laboratory of Fluid Mechanics and Energy
7. M.Toth-Tascău, M.Dreucean, L.Rusu, C.Igna, R.Dascalu, M.Sabǎu, Mechanical Properties Evaluation of Canine Bones using Torsion and Bending Tests, 8th International Conference Research and Development in Mechanical Industry RaDMI 2008, 14 – 17 September 2008, Užice, Serbia, ISBN 978-86-83803-24-3, p.95-104, Plenary session (invited papers)
8. M.Toth-Tascău, M.Dreucean, G.Rusu, L.Rusu, Quality Assurance Based On Interlaboratory Comparison In Ciducos Testing Laboratory, 8th International Conference Research and Development in Mechanical Industry RaDMI 2008, 14 – 17 September 2008, Užice, Serbia, ISBN 978-86-83803-24-3, p.611-617. Session B - Maintenance and effectiveness of technical systems, quality management, ISO 9000, ISO 14000, TQM and management in mechanical engineering
9. M.Dreucean, M.Toth-Taşcău, C.Florea, Nanoindentation on Atomic Force Microscope, 1st International Conference Science and Higher Education in Function of Sustainable Development SED 2008, 17 - 19. September 2008, Užice, Serbia, ISBN 978-86-83573-07-3, p.1-6, Plenary session (invited papers)
10. D.Malita, F.Birsasteanu, S.Dunarintu, M.Toth-Tascau, I.Malita, The combined analyses of biomechanics and helical ct imaging in septic complicated hip arthroplasty, Congress "6th Balkan Congress of Radiology", Belgrade, Serbia, November 20-22, 2008 organized by: Balkan Society of Radiology, www.balkancongress.org/?p=scientific_program_posters
11. D.I.Stoia, M.Toth-Taşcău, C. Precup, Stress Acting at the Bone-Screw interface of an Implanted Cervical Segment, Proceedings of the 8th International Conference on Technical Informatics – CONTI’2008, Vol.1, Automation and Applied Informatics, ISBN 1844-539X, p.179-182
12. D.I.Stoia, M.Toth-Taşcău, L.Rusu, Biomechanical Behavior of a Cervical Fixation Screw, Third International Conference on Biomaterials and Medical Devices (BiomMedD'2008), Bucharest, Romania, November 13-16th, 2008, p.128-129
13. M.Toth-Tascău, M.Dreucean, L.Rusu, D.I.Stoia, G.Tanasie, C.Igna, R.Dascalu, M.Sabǎu, Mechanical Testing of healthy canine bones, Third International Conference on Biomaterials and Medical Devices (BiomMedD'2008), Bucharest, Romania, November 13-16th, 2008, p.130-131
14. K.Menyhardt, M.Toth-Taşcău, Low cost intelligent upper limb prosthesis, Bulletin of the Transilvania University of Brasov, Proceedings of the International Conference „ROBOTICS’08” 13 - 14 November, 2008, Braşov, Vol. 15(50) – Series A, ISSN 1223-9631, Special issue No.1, Vol. II, 2008, ISBN 978-973-598-387-1, Volume 2, pp.761-766, Published by Transilvania University Press Brasov
15. M.Toth-Tascau, M.Dreucean, Path planning of a mobile robot using visibility graph method, Bulletin of the Transilvania University of Brasov, Proceedings of the International Conference „ROBOTICS’08” 13 - 14 November, 2008, Braşov, Vol. 15(50) – Series A, ISSN 1223-9631, Special issue No.1, Vol. II, 2008, ISBN 978-973-598-387-1, Volume 2, pp.495-500, Published by Transilvania University Press Brasov
16. M.Toth-Tascau, D.Dragulescu, C.Vigaru, M.Dreucean, Quality Management System of Lopifo Laboratory, 33 Jupiter Conference, Zlatibor, Serbia, 15-17 mai 2007, ISBN 978-86-7083-593-1, p.5.48-5.51
17. K.Menyhardt, M.Toth-Tascau, Estimation of robot positioning errors, 33 Jupiter Conference, Zlatibor, Serbia, 15-17 mai 2007, ISBN 978-86-7083-593-1, p.3.49-3.54
18. M.Toth-Tascau, D.Dragulescu, C.Vigaru, M.Dreucean, Quality and risk management in the LOPIFO Laboratory, 7th International Conference “Research and Development in Mechanical Industry” RaDMI 2007, 16-20 September 2007, Belgrade, Serbia, ISBN-10 86-83803-22-8 and ISBN 86-83803-22-4
19. D.I.Stoia, M.Toth-Tascau, M.Dreucean, Evaluation methods of the gait parameters, 7th International Conference “Research and Development in Mechanical Industry” RaDMI 2007, 16-20 September 2007, Belgrade, Serbia, ISBN-10 86-83803-22-8 and ISBN 86-83803-22-4
20. D.I.Stoia, M.Toth-Tascau, C.Vigaru, Biomechanical behavior of the lumbar spine, The 2nd International conference “Computational Mechanics and Virtual Engineering” COMEC 2007, Brasov, 11-13 Octomber 2007, ISBN 978-973-598-117-7, p.435-438
21. M.Toth-Tascau, D.I.Stoia, M.Dreucean, Protocol for gait analysis based on laboratory investigations, The 2nd International conference “Computational Mechanics and Virtual Engineering” COMEC 2007, Brasov, 11-13 Octomber 2007, ISBN 978-973-598-117-7, p.527-532
22. M.Toth-Taşcău, D.Drăgulescu, M. Dreucean, Improving the path planning simulation based on visibility graph method, MECHANICAL ENGINEERING TECHNOLOGIES`06, V International Congress, 20-23.09.2006 Varna, BULGARIA, Section I Virtual Engineering. In Automation. Management and engineering, Volume 5/88 September 2006, ISSN 1310-3946, pp. 68-70
23. D.Drăgulescu, M.Toth-Taşcău, K. Menyhardt, I. Stoia, Simulating 3D active workspace of an antropomorphic shaped end effector, MECHANICAL ENGINEERING TECHNOLOGIES`06, V International Congress, 20-23.09.2006 Varna, BULGARIA, Section I Virtual Engineering. In Automation. Management and engineering, Volume 5/88 September 2006, ISSN 1310-3946, p. 18-20
24. D.Drăgulescu, C. Stoicănescu, M.Toth-Taşcău, M. Dreucean, Mobile robot motion in a virtual laboratory, MECHANICAL ENGINEERING TECHNOLOGIES`06, V International Congress, 20-23.09.2006 Varna, BULGARIA, Section I Virtual Engineering. In Automation. Management and engineering, Volume 5/88 September 2006, ISSN 1310-3946, p. 71-74
25. M. Dreucean, D.Drăgulescu, M.Toth-Taşcău, Simulation in evaluation and control of manufacturing systems, MECHANICAL ENGINEERING TECHNOLOGIES`06, V International Congress, 20-23.09.2006 Varna, BULGARIA, Section I Virtual Engineering. In Automation. Management and engineering, Volume 5/88 September 2006, ISSN 1310-3946, p. 64-67
26. M.Toth-Taşcău, D.Drăgulescu, M. Dreucean, C. Vigaru, Quality management of CIDUCOS testing laboratory, Proceedings Simpozijum o operacionim istrazivanjima (Proceedings of XXXIII Conference on Operation Research) SYM-OP-IS 2006, Banja Koviljaca, 3-6 Oct. 2006. Editor:Dragan Radojevics, Beograd, Institut Mihajlo Pupin, ISBN 86-82183-07-2, p. 105-108.
27. D.Drăgulescu, C. Stoicănescu, M.Toth-Taşcău, M. Dreucean, Path planning of a mobile robot in a virtual laboratory, 6th International Conference Research and Development in Mechanical Industry RaDMI 2006, Papers from Sessions A,B,C,D,E, Budva, Muntenegro, 13-17 September 2006, ISBN-10 86-83803-21-X and ISBN-13 978-86-83803-21-7, p. 1-6
28. M. Dreucean, D. Drăgulescu, M.Toth-Taşcău, Computing the uncertainty in spectrometric determination, 6th International Conference Research and Development in Mechanical Industry RaDMI 2006, Papers from Sessions A,B,C,D,E, Budva, Muntenegro, 13-17 September 2006, ISBN-10 86-83803-21-X and ISBN-13 978-86-83803-21-7, p. 1-4
29. M.Toth-Taşcău, D. Drăgulescu, M. Dreucean, C. Vigaru, Quality management of CIDUCOS testing laboratory, 6th International Conference Research and Development in Mechanical Industry RaDMI 2006, Papers from Sessions A,B,C,D,E, Budva, Muntenegro, 13-17 September 2006, ISBN-10 86-83803-21-X and ISBN-13 978-86-83803-21-7, p. 1-6
30. D.Drăgulescu, L. Rusu, M.Toth-Taşcău, About the Behavior of Fixation Devices on the Fractured Mandible, Proceedings of 3rd Romanian-Hungarian Joint Symposium on Applied Computational Intelligence, Timisoara, May 25-26, 2006, ISBN 963 7154 46 9, p. 148-153
31. D. Drăgulescu, L.Rusu, M.Toth-Taşcău, E. Urtilă, Study of a custom implant for maxillofacial surgery, Proceedings International Conference on Biomaterials & Medical Devices BiomMedD’2006, November 9-11, 2006, ISBN 973-718-566-8, ISBN 978-973-718-566-2, p.97
32. M.Toth-Taşcău, C. Vigaru, D. Drăgulescu, M. Dreucean, Testing system for maxilofacial surgical implants, Proceedings International Conference on Biomaterials & Medical Devices BiomMedD’2006, November 9-11, 2006, ISBN 973-718-566-8, ISBN 978-973-718-566-2, p.287 Papers published in proceedings of national conferences 1. L.Rusu, M.Toth-Taşcău, C.Vigaru, The dynamic analysis of a simplified prosthesis of the lower limb, Simpozionul National de Biomateriale "Biomateriale si Aplicatii Medico-Chirurgicale", SNB 2009, Bucuresti, 21-22 Oct. 2009, ISBN 978-606-521-404-0, p.32-33
Papers published in proceedings of national conferences
1. L.Rusu, M.Toth-Taşcău, C.Vigaru, The dynamic analysis of a simplified prosthesis of the lower limb, Simpozionul National de Biomateriale "Biomateriale si Aplicatii Medico-Chirurgicale", SNB 2009, Bucuresti, 21-22 Oct. 2009, ISBN 978-606-521-404-0, p.32-33
2. D.I.Stoia, M.Toth-Taşcău, C.Vigaru, K.Menyhardt, Biomechanical analysis of the assembly upper limb - force amplifier exoskeleton, Simpozionul National de Biomateriale "Biomateriale si Aplicatii Medico-Chirurgicale", SNB 2009, Bucuresti, 21-22 Oct. 2009, ISBN 978-606-521-404-0, p.30-31
